Products

Home/Products

LF1-400

115/200V 400Hz Single Phase output, at up to 1kVA

A transformer ensures full isolation between the output voltage and the incoming supply and the output neutral may be earthed externally if required. The unit is fully protected against overcurrent and overtemperature conditions. Input power and output cable supplied.

LF1-400-3kW

115V 400Hz Single Phase output, at up to 3kVA

The LF1-400-3kW frequency converter offers low price fixed voltage single phased full isolation between the output voltage and the incoming supply, and the output neutral may be earthed externally if required. The unit is fully protected against overcurrent and temperature conditions, LF1-400-3kW are supplied with input and output cables.

LF3-400

115/200V 400Hz Three Phase output, at up to 3kVA

A transformer ensures full isolation between the output voltage and the incoming supply and the output neutral (star point) may be earthed externally if required. The unit is fully protected against overcurrent and overtemperature conditions. Input power and output cable supplied.

LP1

An easy to use SFC, with 1kVA of variable single phase output

The LP1 is a single phase frequency converter, with variable output voltage and frequency. Output frequency can be set to any value between 45Hz and 1kHz. Output voltage is variable from zero to maximum in two ranges, usually 0-135V and 0-270V. Output current capability is doubled on the lower range.

LP3

An easy to use Frequency Converter, with 3kVA of variable Three Phase output

The standard unit has three phase output at up to 3kVA and can operate from a European 230V single phase supply. Output frequency can be set by the user to any value between 45Hz and 1000Hz. Output voltage is variable from zero to a maximum in two ranges, 0-135/234V and 0-270/468V. Output current capability is doubled on the lower range.

ME1

Single Phase Output 3.2kW - 32kW 1:1

The ME1 series of Static Frequency Converters consists of a wide range of single and three phase input systems with a single phase output. Custom built systems to meet specific requirements are our speciality, the ME1’s modular microprocessor based design makes it incredibly flexible and thus easy to meet almost any build requirement.

ME3

Fixed Three Phase Input System with Three Phase Output 10kVA – 300kVA

The Magnus Power ME3 S.F.C. provides flexibility, efficiency and compatibility in applications where high quality sine wave shape is a crucial factor

F-Range

30kVA, 45kVA, 60kVA & 90kVA

Magnus Powers Ground Power Units (GPU's) were designed with Power factor correction to guarantee a perfect sinusoidal input current from 25% to 150% load and a low THDi (<1.5%).