Emergency Lighting

All emergency lighting inverters from Magnus power are to BS EN50171:2001.
With these inverters all components can be accessed from the front and so there is no need to leave space at the sides or back for ventilation or maintenance. All the ranges come with a standard battery back up time of 1 or 3 hours.

Product Guide

EL1
This is to BS EN50171. The AC outputs compatible with suitable standard mains luminaires. It comes with intergrated distribution with 4 outgoing ways, each configurable to be maintained, non maintained, or switched. The EL1 can be programmed for weekly automatic test for battery and or load monitoring .Output power from 150VA to 1,500VA

EL1 Compact
This is to BS EN50171. Output power from 1kVA to 32 kVA , single phase AC. These units are offered with contactor changeover as standard, an off line (no break) solution can be offered as well. As the output is 230Vac single phase it can be wired in without any modification into existing lighting circuits

EL3
This is BS EN50171. All components can be reached from the front and so there is no need to leave space at the back or sides of the units for ventilation or maintenance. Output power is from 10kVA to 100kVA, the output is three phase at 400Vac.Again this can be used with standard mains luminaires and integrated into existing lighting circuits. The inverter has been designed in such a way that unbalance loads are not a problem. Systems have been designed and sized to make maximum use of the batteries this will mean you get the best possible value for your money.